5 Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
•
Make sure that the clock is set correctly.
1
Press and hold
activate alarm setting mode.
» The hour and minute digits and the
alarm icon (
2
Press + TUNING/ HR - to set hour.
3
Press + PRESET/ MIN - to set minute.
4
Press
or to confirm.
» [buz] (buzzer) or your last listened
frequency blinks.
5
Press + TUNING/ HR - or + PRESET/
MIN - to select an alarm source: buzzer or
your last listened channel.
6
Press
or to confirm.
Tip
•
When alarm sounds, volume increases gradually. You
cannot adjust the alarm volume manually.
Activate/deactivate alarm timer
•
Press
or
repeatedly to activate or
deactivate the alarm timer.
or
appears if the alarm timer is on
»
and disappears if it is off.
•
To stop the alarm, press the
corresponding
» The alarm repeats ringing for the next
day.
or
for two seconds to
or
) begin to blink.
or
.
Snooze the alarm
When alarm sounds, press SNOOZE.
•
» The alarm snoozes and repeats ringing
nine minutes later.
EN
7
Need help?
Do you have a question about the AJ4300 and is the answer not in the manual?