4
Press SET TIME again to confirm.
» The set time is displayed.
Tip
•
If there is no operation for 10 seconds, the radio exits
time setting mode automatically.
Set alarm timer
You can set two alarms to ring at different time.
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
Press and hold AL1 or AL2 for two
seconds to activate alarm setting mode.
» The hour and minute digits blink.
2
Press HOUR repeatedly to set the hour.
3
Press MIN repeatedly to set the minute.
4
Press AL1 or AL2 to confirm.
Tip
•
If you press and hold HOUR or MIN for two seconds,
the hour or minute digits will increase or decrease
continuously.
•
If there is no operation for 10 seconds, the radio exits
alarm setting mode automatically.
Activate or deactivate the alarm
timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
6
EN
» If the alarm timer is activated, the
alarm indicator for the radio or buzzer
is displayed.
» If the alarm timer is deactivated, the
alarm indicator disappears.
•
To stop the ringing alarm, press the
corresponding AL1 or AL2.
» The alarm repeats ringing for the next
day.
Note
•
If FM/AM tuner is selected as alarm source, yet you are
listening to radio at the preset alarm time, buzzer is
activated automatically.
•
When the alarm sounds, volume increases gradually
to the maximum alarm volume. You cannot adjust the
alarm volume manually.