WeatherBug UM24 System Installation, Operation And Maintenance Manual page 19

HD MotionCam Installation Manual
3. Slide the Grommit sleeve on the mounting arm above the threads.
4. Using the Teflon tape wrap the threads a few times (this will depend on how
tighly you wrap the tape around the threads). There needs to be enough tape to
stop leaks but not too much that you cannot screw on the thread collar.
5. Screw the threaded collar onto the mounting arm and tighten. This will hold the
camera to the mounting arm.
EN.PM.UM24 20160211
-19-
Page 19 of 29