Table of Contents
Advertisement
HD MotionCam Installation Manual
Site Evaluation
All sites will have certain building restrictions. To get the most out of the camera, a
location needs to be chosen that will present the least restrictions.
The sky, sun, and clouds are important elements in the captured images. A "perfect"
picture includes about 60% sky and about 40% earth.
Remember that the camera will be operating throughout the year. A good view in the late
fall or winter may be obstructed by tree growth in the spring and summer.
Spend time looking at the lighting and shading based on the time of day, types of
weather, and time of year. It is best to center the camera facing toward the prevailing
winds – generally westerly in the United States. If you invest the time now in site
evaluation, your efforts are sure to pay off in the end.
The camera must also be securely mounted to avoid distortion of the camera images. The
mounting arm must be wall mounted for optimal stabilization. The camera should be
mounted high enough so that there is a clear view of the horizon. The unit should be
mounted so that it is easily accessible. This will aid in any maintenance or adjustments
that may have to be made. Once you have chosen the direction you want the camera to
face, it should be mounted on the outermost wall in that direction. This will keep any
roofs and unnecessary structures out of your camera view.
Select and verify a route to run the cable from the camera to the interior of the building.
Note: Keep in mind that the unit comes with 200 feet of Ethernet cable that must
reach from the camera to the network connection. Any cable routed on the
building structure exterior must be secured and routed in a conduit.
THE MAXIMUM LENGTH OF ETHERNET CABLE IS 200 FT.
EN.PM.UM24 20160211
-10-
Page 10 of 29
Advertisement
Table of Contents
