Mounting The Lcd Monitor - Waeco PerfectView M511L Installation & Operating Manual

_RV-511S.book Seite 26 Mittwoch, 15. März 2006 3:08 15

Mounting the LCD monitor

The remote control has the following control elements:
No. in 0,
Designation
page 6
1
2
–
3
+
4
–
5
+
6
–
7
+
8
–
9
+
10 V1/V2
11 SYS
6 Mounting the LCD monitor
6.1 Tools required
For installation and assembly you will require the following tools:
Measuring ruler (1 4, page 3)
Centre punch (1 5, page 3)
Hammer (1 6, page 3)
Drill bit set (1 7, page 3)
Drill (1 8, page 3)
Screwdriver (1 9, page 3)
26
Description
Switches the monitor on or off (stand-by).
Reduces the brightness.
Increases the brightness.
Reduces the colour value.
Increases the colour value.
Reduces the contrast.
Increases the contrast.
Reduces the audio volume.
Increases the audio volume.
Switches from video source 1 to video source 2
and vice-versa.
No function assigned.
PerfectView M511L