Source Menu - Movies 2 go MTG10UHD Owner's Manual

Source menu

The System is capable of accessing six source inputs. To select or change a source, press the
source button on the front panel or the Source button on the remote control. The source
OSD will appear on the screen as shown in the figure below. Use the ＋ or － cursor buttons
on the front panel or the p or q cursor buttons on the remote control to highlight a source.
Press the Source
the desired source.
DVD
The DVD source input is used to play DVDs, Audio CDs and MP3 discs.
USB
The USB source input is used to play MP3 files, JPEG files (Photos) and MPEG I, II files.
AV
An external video source such as a video game system, or other audio/video devices can be
connected to the AV input. This AV input connection is performed when the unit is installed.
Turn the video source component on with its power button or remote control and it is now
ready to play the audio and video signals from the source connected to the AV input.
AUX
An external video source such as a video game system or other audio/video devices may be
connected to the system via the AUX input. Connect your peripheral device to the supplied
Aux Adapter harness and plug the harness into the AUX Input on the side of the system. Turn
the external source component on with its power button or remote control and it is now ready
to play the audio and video signal from the source connected to AUX.
16
button on the front panel or the OK button on the remote control to select
SOURCE
DVD
USB
AV
AUX
HDMI 1
HDMI 2
MOVE