General; Installation, Operation And Cleaning; Tools; Lubrication And Thread Locking - Hallde SB-4 Service Manual

. .
. .
. .
. .
.

General

This service manual gives instructions for removal and replacement of parts including service
procedures and adjustments for the Blender SB-4 100 – 240 V single phase.
This service manual is prepared for the use of trained service technicians and should not be used
by those not properly qualified.

Installation, operation and cleaning

Refer to HALLDE User Manual.

Tools


Standards set of hand tools

Set of torx bits

Knife guard

Torque wrench

Lubrication and thread locking


Loctite 243 or equivalent
3