Tally; Audio Level Meters - BON ELECTRONICS FM-073SC User Manual

1) DC Power Jack
7V ~ 24V DC power can be used.
2) SDI 1, 2 Input Ports
HD SDI or SD SDI input ports. SDI signal should be fulfill SMPTE standards.
3) SDI Loop-Through and HDMI-to-SDI Out Port
This port can be used either SDI Loop-through or SDI out of HDMI-to-SDI
converter.
4) Component YPbPr or CVBS 1,2,3 Input Ports
Component YPbPr or CVBS(Composite) input ports.
5) Tally Input
To display Red, Green, Amber tally.
6) Update Port (RJ-11 Jack)
Serial communication port for updating firmware or monitor control.
7) Control Port
Monitor control port. The detail is in the chapter "Remote Terminal Assignment
Connection"
8) Internal Power Port
External battery power connection port. (7V ~ 24V)
9) USB Port
USB firmware update port.

Tally

Tally mode displays Red, Green, Amber color by the input from tally (RJ-45 GPI)
input port.

Audio Level Meters

Audio level meters displays max 16 channels. But it depends on the number of
channels contained in the signal itself. For example, if the signal contains 2
channels, the audio level should be 2 channels.
The odd channels are displayed in the left, whereas the even channels are in the
right. The position of the meters can be set to top or bottom of the screen on the
8