BON ELECTRONICS FM-073SC User Manual page 38

Strange Color on BON Logo on
Startup
the Startup Logo Color was ok but
Strange Color on Active Screen
Screen Position Mismatch
No Audio Output
Colors look different between
different models
Colors look different between same
models
Reconnect the Power and Restart the Monitor.
(Call for Service if the Symptom appeared more than 3 times)
Make Monitor "Factory Default" and Try again.
Select Test Pattern(Internal Pattern) in the menu and See if R,G,B
Color is Correct.
Check the Input Selection.
Try with Different Cable.
Check if Each Cable is correctly Connected when you use
Component as Input.
Make Monitor "Factory Default" and Try again.
Reconnect the Power and Restart the Monitor.
Try with Different Input Device. If successful, the Failed Input
Device may Generate Non-Standard Signal (Please Inform Us its
Model Name).
Check if the Volume level is 0.
Display the Audio Level Meters and See its output.
Give your Monitor 1 hour warmup time.
Because Different Panels have different Characteristics, Colors
might look Different.
Give your Monitor 1 hour warmup time.
Same Panels are not exactly same but they have a tolerance range
among them by the Panel Manufacturer, so Colors might look
Different.
* The tolerance range is in Panel Standard Document included in CD
38