BON ELECTRONICS FM-073SC User Manual page 6

DSLR Zoom
This zoom-in/out preset allows fully scaled-up monitoring of contracted video
from DSLRs. Zoom-in/out area can also be customized to allow partial or full view.
To choose camera type, press Menu and choose Video, choose a DSLR camera
from Canon 5D Mark II/7D, 60D, Nikon D800, Sony A77, Panasonic GH2 and Canon
5D Mark III.
6) H/V Delay
H/V Delay allows you to check the outside signal of active picture area. This mode
is for broadcast professionals. By pressing the button, it switches the mode in the
order of : H Delay, V Delay, H/V Delay, Off.
7) Daylight
This button switches luminance level in the order of : Normal, Brighter, Brightest .
Press this button to switch the luminance to see the screen comfortably.
8) Enter
Enter Key.
9) Function Keys
User-preferred function can be assigned to function keys.
10) Waveform / Vectorscope
Waveform enables users to check the luminance level. Vectorscope is for checking
chrominance values of the picture. The mode is switched in the order of :
Waveform, Waveform Parade, Vectorscope, Wide Waveform, Full-Screen
Waveform, Full-Screen Vectorscope.
* Some afterimage might be left on Waveform when the input picture
freezed long on interlace signal.
* On SDI 2K input with Psf scanning mode, displaying Circle or
Horizontal Line pattern might cause an afterimage effect. However, it
will be disappeared after the picture is changed.
11) False Color
Shows pictures in specific colors as its luminance level other than the original
colors. Much exposed area is filled with red while little exposed area is purple.
* 10-bit, 12-bit Dithered gradient pattern might not be displayed
clearly in this mode.
6