Table of Contents
Advertisement
AITONS EQUIPMENT
INSTALLATION
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the Warranty. See the warranty card enclosed with your
unit for more details.
CHASSIS INSTALLATION
Units are shipped without a sleeve. In applications where unit is a replacement, it is recommended that a Heat Controller sleeve
be used.
outdoor grille is installed on the sleeve). See Table 3 for details.
tween the grille and outdoor coil tube sheets. These foam seals provide a barrier to separate outdoor coil leaving air from mixing
with the outdoor incoming air (known as air recirculation).
CAUTION
!
UNIT DAMAGE AND/OR OPERATION HAZARD
Failure to follow this caution may result in equipment
damage or improper operation.
sheets must make a seal between the coil and the grille or
loss of performance and premature damage to the major
components can result.
OWNER'S MANUAL
Manufacturer
General Electric
Carrier
Amana
Trane
Friedrich
wall sleeves.
Fig. 4—Unit Components
6
Packaged Terminal A/C
Wall Sleeve Part Number
Metal Sleeve RAB71
Plastic Sleeve RAB77
Metal Sleeve SLEEVE-STEEL-1PK
Plastic Sleeve SLEEVE-INSUL-1PK
Metal Sleeve WS900B
Metal Sleeve SLV149
T---Series Metal 111/2---in. Deep Wall
Sleeve*
Standard Depth Wall Sleeve
16 X 42 X 133/4---in. PXWS
-
Advertisement
Table of Contents
