Safety Considerations; General Information - AITONS EKTC07-1G Owner's Manual

Packaged terminal air conditioners & heat pumps 7,000-15,000 btuh
Table of Contents

Advertisement

AITONS EQUIPMENT

Safety Considerations

Recognize safety information. This is the safety-alert symbol
manuals, be alert to the potential for personal injury. Understand these signal words: DANGER, WARNING, and CAUTION. These
words are used with the safety-alert symbol.
DANGER
WARNING
CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.
Failure to follow this warning could result in personal injury, death and/or property damage. For your safety, the
property damage, personal injury, or loss of life.
• This unit must be properly installed in accordance with the Installation Instructions before it is used.
• Immediately repair or replace all electric service cords that have become frayed or otherwise damaged.
• Unplug or disconnect the unit at the fuse box or circuit breaker before making any repairs.
NOTE

GENERAL INFORMATION

Heat Controller package terminal air conditioners and heat pumps provide a high standard of quality in performance, workman-
ship, durability and appearance as they heat and cool the occupied air space year round.
This manual provides information for ease of installation, operation and maintenance. All models are designed for through-the-
wall installation. Separate installation instructions are included with all accessory components.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector's use.
IMPORTANT: Observe all governing codes and ordinances.
NOTE TO INSTALLER
Be sure to leave these instructions with the owner.
NOTE TO OWNER
Keep these instructions for future reference. Be sure to write down the model and serial number of unit on space provided
on back page. The model and serial number can be located on the serial number plate attached to unit. These numbers are
required for service. See Fig. 1.
OWNER'S MANUAL
!
WARNING
PERSONAL INJURY AND/OR PROPERTY DAMAGE HAZARD
Fig. 1 – Sample Data Information Plate
!
.When you see this symbol on the unit and in instructions or
2
Packaged Terminal A/C

Advertisement

Table of Contents
loading

Table of Contents