Auto Standby; Apply Factory Settings; Wall Mount - Philips HTL2140B User Manual

Auto standby

When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio play from a connected device.

Apply factory settings

You can reset this product to the default
settings programmed at the factory.
1
In AUDIO IN mode, on the remote
control press Volume -, BASS -, and
TREBLE - in sequence within three
seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
12 EN

5 Wall mount

Note
•
Before wall mounting, make sure the wall can support
the weight of this product.
•
For wall mounting, this product must be securely
attached to the wall in accordance with the installation
instructions. Improper wall mounting may result in
accident, injury or damage. If you have any query,
contact Consumer Care in your country.
Screw length/diameter
Depending on the type of wall mounting this
product, make sure that you use screws of a
suitable length and diameter.
3.2-3.6 mm/0.13"-0.14"
≤7.9 mm/
0.3"
>25 mm/0.98"
See the illustration in the quick start guide on
how to wall mount this product.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang this product on the fastening screws.
3.5-4 mm/
0.14"-0.16"