IC Audio MT-AMP 1000 User Manual page 26

25. Technical specifiactions
Power Source
Rated Output
Amp Type
Power Consumption
Frequency Response
Distortion
Input
100V Input
Output
Phantom Power
S/N Ratio
Tone Control
Control Input
MT-AMP 1000
115/230V AC , 50/60 Hz, 24V dc
240W
Analog
720W
MIC:
AUX:
1% rated output power
MIC 1 - 6:
LINE 1 - 2:
AUX 1:
AUX 2:
AUX 3:
Power In:
Paging Station:
TEL/EMEG:
Wall Control Panel:
Ext Amp in:
REC Out:
PRE Out:
Ext. Amplifier XLR out:
MOH 0/8Ω:
MOH 600Ω:
Direct Output:
To PEX-8000:
Z1 - Z6 Output:
ON / OFF,MIC 1 - 6, 16V dc.
MIC 1 - 4:
TEL:
MIC 5 - 6:
LINE 1 - 2:
AUX 1 - 3:
Bass: ±10dB, 100Hz, Treble: ±10dB, 10KHz
Wall control panel:
Remote Power:
26
60 - 15KHz +1/-3dB
50 - 20KHz +1/-3dB
1.5mV,600Ω,balanced
XLR terminal/RJ45 terminal(MIC 1)
200mV,600Ω,balanced
XLR terminal
MIC 5/LINE 1, MIC6 /LINE 2 switchable
500mV, 10KΩ,unbalanced
XLR terminal
500mV,10KΩ,unbalanced
RCA terminal
300mV,10KΩ,unbalanced
RCA terminal
1V, 600Ω, unbalanced
RCA terminal
1V, RJ45 terminal
100mV, 600Ω, balanced
1V, RJ45 terminal
100V, balanced Input
100V input
1V, unbalanced, RCA Jack.
1V, unbalanced, RCA Jack.
1V, balanced, XLR Jack.
8Ω,1W, unbalanced
600Ω, output,1Vrms, balanced
100V - 70V - 8Ω - 0.
RJ45 terminal
100V - 0
> 60 dB
> 70 dB
> 60 dB
> 70 dB
> 75 dB
RJ45 socket , operate under PX-8240
selector setting at "REMOTE"
Dry contact terminal
Open Voltage: 24V DC
(when the unit's power is at "OFF" position)
Short circuit to switch ON the unit.
ic audio GmbH
Boehringerstraße 14a; D-68307 Mannheim; Germany
EN
Fon: + 49(0) 621 / 77096-0; Fax: + 49(0) 621 / 77096-26
E-Mail: info@ic-audio.com; www.ic-audio.com
ic audio