Using Radio Cards; Configuring Radio Cards - Paxar Pathfinder TC6035AN Application Notes

Dos-based system
Table of Contents

Advertisement

U S I N G R A D I O C A R D S
You can use a radio card with the appropriate device drivers to
enable a printer to run radio-frequency (RF) communications, which
allow the printers to use wireless radio networks. The card goes in the
printer's PC-card slot.
Following are the available radio cards:
Aironet 3000 (U.S./Canada)
Aironet 3500 (U.S./Canada)
Aironet 2.4 (U.K., France, Germany, and Australia)
Symbol 2.4 100mW and 500mW (U.S./Canada)
Symbol 2.4 (U.K., France, and Germany)
Symbol 902 Mhz (U.S.)
Proxim 2.4 (U.S./Canada, U.K., France, and Germany)
C o n f i g u r i n g R a d i o C a r d s
The following procedure describes how to configure radio cards. Refer
to the Programmer's Manual for more information.
1.
From the diskette that came with the SDK, gather the files for your
radio card.
7/21/98

Using Radio Cards 3-1

3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monarch pathfinder ultra

Table of Contents