Texas Instruments ti nspire cx Manual Book page 68

: If the handheld is connected to the computer with the USB cable, no network
Note
names appear on the screen, and you can continue logging in.
4. If the name of the network that appears is correct, click Login . If the network is not
correct, click Network.
The handheld screens displays the last network the wireless client was attached to,
and also displays other networks within range.
5. Select the network from the list, and then click Connect .
The login screen shows the connection status and displays the network name when
the connection is successful.
6. Type your username and password.
7. Select Login .
The Login Successful screen opens.
68 Working in a TI-Nspire™ CX Navigator™ Teacher Software Classroom