Maintenance; Oven Light - GE JGB720SEJSS Owner's Manual

Maintenance

Oven Light

WARNING
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
bare hands or a damp cloth can cause burns.
Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse
CAUTION
or circuit breaker panel. Be sure to let the light cover and bulb cool completely.
The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped
section for detailed oven door removal instructions.
Replacing the Light Bulb:
1. Disconnect electrical power to the range.
2. Hold the glass cover stable, so it doesn't fall when
released.
3. Slide near the indent of the cover holder until the
cover is released.
release the glass cover.
4. Replace bulb with a 40-watt household appliance
bulb.
6. Pull the wire cover holder near the indent until the
indent in the wire cover holder is located in the indent
of the glass cover.
7. Connect electrical power to range.
26
Before replacing oven light bulb, disconnect the electrical power to the
The glass cover and bulb should be removed when cool. Touching hot glass with
Glass cover
Indent
Wire cover holder
49-85220-2