Starting And Driving The Vehicle; System Start-Up - Ferrari 488GT Owner's Manual

Starting and driving the vehicle

System start-up

When the instrument panel is activated (KEY-ON, see page 135)
both the TFT displays on the instrument panel are activated and
system diagnosis is performed. During diagnosis, which lasts 5
seconds, a check is performed on the warning lights on the panel
and the presence of any faults is checked.
If diagnosis detects any errors, they are only displayed once the
5 seconds required for the check have elapsed. The cases listed
below are an exception and errors are displayed as soon as the key
is turned to on, even during diagnosis:
- Low engine oil pressure (see page 105).
- Inertia switch triggered (see page 104).
- Semi-automatic gearbox safety warnings.
- Deactivation of EPB warning (see page 152).
If the next scheduled maintenance deadline is approaching, each
time the key is turned to on, information on scheduled maintenance
is automatically displayed after diagnosis. For further information,
refer to the "Maintenance Schedule" paragraph on page 238.
Finally, each time the key is turned to on, the message for activation
of the alarm when an intrusion has been attempted (see page 19) is
also displayed (after diagnosis).
Once the system check has been completed, the gearbox display
is activated and the letter "P" (Parking) or "N" (Neutral) will be
displayed.
Important note
BEFORE YOU DRIVE
If the warning light A does not turn off after diagnosis,
indicating a fault in the gearbox (which is also indicated by
the symbol and specific message on the left TFT display - see
page 108), contact the Ferrari Service Network.
A
About your Vehicle
3
133