Voice commands and PTT (Push-To-Talk) function
The Push To Talk function is a hands-free in-vehicle
communications system that allows you to navigate the system by
using voice commands.
To call up this function, press button
spoke of the steering wheel. Button
commands; if the voice recognition function is already activated,
it can be deactivated by quickly pressing button C. If there is an
incoming call, quickly press button
refuse it.
If you give the voice command "Guidance", the system reads out a
list of voice commands for the displayed screen.
The voice recognition system is flexible and identifies a set of
words pronounced by the user by extracting the meaning to
activate the desired function. For example, different phrases can be
used to call up the same function.
For example, in the relevant screen, if you say "Connect telephone"
or "Pair telephone" the system activates the same function. You
can therefore speak freely because the system is designed to
understand commands even if different words are used.
C
behind the left-hand
C
is used to activate the voice
C
to accept it or hold it down to
C
When a phone/device is connected, press and hold down button
to activate the voice recognition function which is built into the
phone/device (if compatible).
About your Vehicle
C
3
197