Maintenance - JRC JHS-183 Instruction Manual

5.3.3 Maintenance

Select 3.MAINTENANCE
It is possible to check the current status with "Maintenance" menu screen.
In order to return to MAIN MENU screen, press CLR key.
M A I N T E N A N C E
1 . S E L F
2 . C O M M U N I C A T I O N
3 . A I S
4 . S E N S E R
5 . E V E N T
6 . S O F T W A R E
The outline of the each menu item is as follows:
1. SELF DIAGNOSIS ･･･Execute the self diagnosis test. (Refer to 5.3.3.1)
2. COMMUNICATION TEST ･･･Transmits an interrogation message and then confirms the result for
3. AIS ALARM ･･･Displays malfunction alarms. (Refer to 5.3.3.3)
4. SENSOR STATUS ･･･Displays current status of sensors. (Refer to 5.3.3.4)
5. EVENT LOG ･･･Displays the history of power ON/OFF and so on. (Refer to 5.3.3.5)
6. SOFTWARE VERSION ･･･ Displays software versions installed. (Refer to 5.3.3.6)
in "MAIN MENU" screen, "MAINTENANCE" menu screen is displayed.
D I G N O S I S
A L A R M
S T A T U S
L O G
V E R S I O N
communication check.(Refer to 5.3.3.2)
T E S T
5-37