Bosch HCP30E51UC Use And Care Manual page 10

Area
Glass
Controls
Cleaning agents
Glass cleaner:
Clean with a soft cloth. Do not use
a glass scraper.
Warm soapy water:
Clean with a damp dish rag and
dry with a soft towel.
Risk of damage to electronics
due to permeating damp. Never
clean controls with a wet cloth.
Do not use stainless steel
cleaner.
Cleaning the metal grease filter
WARNING
RISK OF FIRE
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance without the grease
filter.
Notes
o Do not use any aggressive, acidic or alkaline cleaning
agents.
o When cleaning the metal grease filters, also clean the
metal grease filter holder in the appliance with a moist
cloth.
o You can clean the metal grease filters in a dishwasher
or by hand.
In the dishwasher:
Note: Slight discoloration is possible when cleaning the
grease filters in the dishwasher. This does not affect the
metal grease filter's functioning.
o Do not clean extremely dirty metal grease filters with
dishes.
o Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
÷ Soak the metal grease filters in hot soapy solution.
o Use a brush for cleaning and then rinse the filters well.
o Allow the metal grease filters to drip dry.
Uninstalling metal grease filter
1. Open the latch and fold down the metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2. Remove the metal grease filter from its mounting.
Notes
o Grease can gather in the bottom of the metal
grease filter.
o Hold metal grease filter horizontally to prevent
grease from dripping.
3. Clean metal grease filter.
Installing metal grease filter
1. Insert metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2. Flip metal grease filter up and snap the latch into
place.
10