Changing The Program - Beko DS 7331 PX0 User Manual

Operating the product
C
When the Child Lock is enabled,
child lock warning indicator on
the display turns on.
C
Child lock is disabled when the
tumble drier is turned off and
turned on again by using the On/
off/program selection button.
C
Child lock is disabled when the
machine is turned off and turned
on again by using the On/off/
program selection button.
When the child lock is active:
If the position of program selection button is
changed while the tumble drier is running or
paused, indicator symbols do not change.
C
When the program selection
switch is turned while the
tumble drier is running and
child lock is active, two beeps
are heard. If the child lock is
cancelled without restoring the
program selection to switch to
its previous position, program
is ended because the position
of program selection switch is
changed.
48 / EN

5.10 Changing the program

after starting
After the tumble drier starts running, you
may dry your laundry in a different program
by changing the selected program.
• For instance, in order to select Extra Dry
instead of Iron Dryness program, select
the Extra Dry program by turning the On/
off/program selection button.
Start the p rogram by pressing the Start/
Pause button.
Adding or removing laundry during pause
If you want to add or remove laundry after
the drying program has started:
• Put the tumble drier into Pause position
by pressing the Start/Pause button.
Drying process stops.
• Open the loading door in Pause position,
and close the door after adding or
removing laundry.
• Start the program by pressing the Start/
Pause button.
C
The process of adding laundry
after the start of drying process
might lead to mixing of wet
laundry with the dried laundry
inside the tumble drier and some
damp laundry at the end of
process.
C
Laundry adding and removing
process can be repeated as
many times as desired during
drying. But this process leads
to extension in the program
time and increase in energy
consumption since it will
repeatedly interrupt the
during process. Therefore, it is
recommended to add laundry
before starting the program.
C
If a new program is selected
by changing the position of
program selection button while
the tumble drier is paused, the
running program ends.
Dryer / User Manual