Electrical Connection; Warnings About Sounds; Adjusting The Feet - Beko DS 7331 PX0 User Manual

Installation
3
Connect one end of the drain hose
supplied with the dryer to the
connection point from where you
removed the hose of the product in
previous step.
4
Connect the other end of the drain hose
directly to the wastewater drain or to
the washbasin.
1
3
A
Hose connection should be made
in a safe manner. Your drain
house will be flooded if the hose
comes out of its housing during
water discharge.
C
Water drain hose should be
attached to a height of maximum
80 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.

3.4 Adjusting the feet

• In order to ensure that the dryer
operates more silently and vibration-
free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet.
• Turn the feet to left or right until the
dryer stands level and firmly.
Dryer / User Manual
2
4
C
Never unscrew the adjustable
feet from their housings.

3.5 Electrical connection

For specific instructions for electrical
connection required during installation (see
1.1.1 Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the
dryer.
If direct water drain connection is made, then
remove the hose connections.
We recommend carrying the
A
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.

3.7 Warnings about sounds

C
It is normal to hear a metallic
noise from the compressor
sometimes during operation.
C
Water collected during operation
is pumped to water tank. It is
normal to hear pumping noise
during this process.
39 / EN