Silvercrest swv 733 a1 User Manual page 35

SilverCrest SWV 733 A1
Insert the dual-band wifi range extender into a socket that is always easily accessible.
Then switch on the dual-band wifi range extender by turning the main switch (10) to the "ON" position.
The dual-band wifi range extender requires a certain amount of time (boot time) after it is switched on
before it is ready to use. After switching the device on, wait for approximately 30 seconds before using
the dual-band wifi range extender.
There are two different ways to configure the dual-band wifi range extender. If your wireless router
supports WPS, you can use this simple function to easily set up the wifi range extender. If you would like
to use a wireless router without WPS, you must connect the dual-band wifi range extender to your
computer via a network cable and configure it.
English - 33