Panoramic Sliding Sunroof - Mercedes-Benz Series 176 Introduction Into Service Manual

Available as special equipment is a panoramic
sliding sunroof with fixed polycarbonate cover at
front and a movable element made of mineral
crystal.
The panoramic sliding sunroof can be moved to a
tilt position and be opened and closed when in the
sliding position.
The panoramic sliding sunroof and the roller sun
blind are operated using the panoramic sliding
sunroof switch in the overhead control panel.
If the switch is moved to the first notch, the
panoramic sliding sunroof and the roller sun blind
are only adjusted as long as the switch is operated.
If the switch is operated beyond the first notch the
automatic mode is activated and the panoramic
sliding sunroof and roller sun blind are each moved
to their respective end position.
i Note
The panoramic sliding sunroof is equipped with an
automatic reversing function. If an object prevents
or restricts the panoramic sliding sunroof from
moving during the closing procedure, the closing
procedure is automatically stopped and the
panoramic sliding sunroof is opened again.
– This printout will not be recorded by the update service. Status: 06 / 2012 –

Panoramic sliding sunroof

Panoramic sliding sunroof
i Note
If the engine is switched off or if the ignition key is
removed, the panoramic sliding sunroof can still
be operated. The function remains available for a
period of five minutes or until a front door is
opened.
Introduction of the New A-Class, Model Series 176
P77.20-2788-00
b 29