MARUTI SUZUKI Celerio Owner's Manual & Service Booklet page 36

76MH1-74E
EXAMPLE
76MH0A029
2) Pull up the release straps on the top of
the seat(s), and fold the seatback for-
ward.
NOTICE
After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of
the lock and prevent the seatback
from being locked securely.
WARNING
If you need to carry cargo in the pas-
senger compartment with the rear
seat back folded forward, be sure to
secure the cargo or it may be thrown
about, causing injury. Never pile
cargo higher than the seatback.
25
To return the seat to the normal position,
follow the procedure below.
WARNING
When returning the rear seatback to
the normal position, make sure that
there is nothing around the striker.
Any foreign materials prevent the
seatback from being locked securely.
CAUTION
When returning the rear seatback to
the normal position, be careful that
your finger is not caught between the
lock and the striker.
EXAMPLE
76MH0A030
Raise the seatback until it locks into place.
BEFORE DRIVING
After returning the seat, try moving the
seatback to make sure they are securely
latched.
CAUTION
Do not put your hand into the rear
seatback lock opening, or your finger
may get caught and be injured.
NOTICE
• When returning the rear seatback
to the normal position, do not allow
any foreign material to enter the
lock opening. This may prevent the
seatback from being locked
securely.
• When returning the rear seatback
to the normal position, be sure to
handle it carefully by hand to avoid
any damage to the lock itself. Do
not push it by using some material
or by applying excessive force.
• As the lock is designed exclusively
for securing the rear seatback, do
not use it for any other purpose.
Incorrect use of it may cause dam-
age to the inside of the lock and
prevent the seatback from being
locked securely.
76MH1-74E
2-14