Table of Contents
Advertisement
Problem(s)
Possible Solution(s)
Only use DMX-cable.
Signal loss
Install an end-plug with 120 ohm capacity.
Important! Keep DMX-cables away from power cables and black light.
COLOR-CON
Make sure the connection to the appliance is in order.
Controller
doesn't func-
This appliance must be operated in the correct mode to have CONTACT with
tion or doesn't
the COLOR-CON controller. The correct MODE on the integrated control
function pro-
panel is "SLAVE".
perly
The appliance has built-in automatic programs that may possibly be set off
StandAlone
by one of the main circuit boards of the control board.
The display
only shows:
Password-lock is activated. Use the password:
####
(MODE; UP; MODE; DOWN; MODE; UP; MODE; DOWN)
5. APPENDIX
25
Advertisement
Table of Contents
