Table of Contents
Advertisement
4. INSTRUCTIONS
Auto & custom program
• Channel 8 selects the current auto- & custom-program [1-10].
• If auto- & custom-program are activated, you can chose the desired step- and transition-time
with channels 2 and 3.
• Channel 8 has priority over channels 2-7.
Dimmer-speed
• Channel 10 is for selecting the dimmer-mode and dimmer-speed.
• If channel 10 is not used, RGBW and master-dimmer are linear.
• The dimmer-modes 1, 2, 3 and 4 describe the different speeds of non-linear dimmer-curves.
23
Advertisement
Table of Contents
