Dmx 512-Control Mode - FEIMEX FX500 User Manual

4. INSTRUCTIONS
DMX 512-CONTROL-MODE
1. Setting the DMX- start address
1.1. Access the functions of the control panel by repeatedly pressing [MENU] until DMX is shown.
Confirm with [ENTER] to access the menu item.
1.2. Repeatedly press [UP/DOWN] until the desired DMX-address is shown.
1.3. Press [MENU], to return to menu.
2. Fixed-colours - selecting a fixed-colour
2.1 Access the functions of the control panel by repeatedly pressing [MENU] until CoLo is shown.
Confirm with [ENTER] to access the menu item.
2.2. Press [ENTER] to switch between colours and strobe.
2.3. Increase or decrease the VALUE of the selected colour by chosing between 000 and 255 with
[UP/DOWN].
2.4. Press [ENTER] to go to the next colour.
2.5. Save the process and press [MENU] to return to menu.
3. Auto program - Selection of different auto-programs
3.1. Access the functions of the control panel by repeatedly pressing [MENU] until auto is shown.
Confirm with [ENTER] to access menu item.
3.2. Chose between the AT, AP and CP program with [UP/DOWN]
3.3. Press [ENTER] to access the desired auto-programm and to change auto-speed.
3.4. Save the process and press [MENU] to return to menu.
16