Hama TWINS Operating Instructions Manual page 12

• Since the battery is integrated and cannot be removed, you will
need to dispose of the product as a whole. Do this in compliance
with the legal requirements.
• Keep the packaging material out of the reach of children due to
the risk of suffocation.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
4. Getting Started and Operation
Note – Stereo/mono
• These operating instructions always refer to the
recommended use with both speakers (stereo).
• If you only want to use one speaker (mono), skip all the
instructions that only refer to use of both speakers (marked
with ∆). The rest of the instructions also apply to use of a
single speaker.
• The magnetic bases (6) of the speakers allow you to combine
them into a single speaker or attach them to magnetic surfaces
individually.
4.1 Switching the product on and off
Switching on the product
• Press and hold the function button
switch the speaker on or off. An announcement will play and the
status LED (2) will start to flash twice in blue in quick succession.
• An acoustic signal indicates that you can now connect the
second speaker.
∆ Press and hold the function button
speaker for about 4 seconds to switch on the second speaker.
An announcement will play and the status LED (2) will start to
flash in blue.
∆ After a brief acoustic signal, this speaker will search for a
connection to the speaker that was switched on first. Two brief
acoustic signals confirm that connection was successful. The
status LED (2) of one speaker flashes once at regular intervals,
and the status LED (2) of the other always flashes twice in quick
succession.
∆ The two speakers can now be connected to a terminal device.
• If the first speaker is not connected to the second one, another
acoustic signal will sound. The status LED (2) will flash quickly
in blue.
• The speaker can now be connected to a terminal device.
• It can now no longer be connected to the second speaker. Switch
the speaker(s) off again and start over from the beginning.
Switching off the product
• Press and hold the function button
to switch the speaker on or off. An announcement will play and
(5) for about 4 seconds to
(5) on the second
(5) for about 4 seconds
11