Table of Contents
Advertisement
1.
Make a hole in the ceiling to install the ceiling-mount
bracket and cables.
Caution:
■
Mounting position varies on the projector used. Make
sure that the template sheet (A) corresponding to the
projector is used.
■
When determining the hole position, use the supplied
template sheet (A).
■
The direction to the screen is indicated on the template
sheet (A).
2.
Use four M13 screws, to secure the ceiling-mount
bracket to the ceiling with the arrow facing toward the
screen.
■
Before securing the ceiling-mount bracket, be sure
to remove the template sheet (A).
■
The M13 screws are not included in the supplied
parts. Prepare the M13 screws suitable for the
ceiling structure.
3.
Turn the projector base up, and remove the two
adjusting legs on front side.
4.
Install the attached M4 screws at the six screw fastening
positions on the Base bracket.
Caution:
■
Make sure to remove the adjusting foot before attaching
the screw to the front part of the projector.
■
Be sure to keep the removed adjusting foot safely for
later use.
5.
Secure the terminal clamp with the attached M4 screw
at (A) on the Base bracket.
Make sure to fasten and tighten the screw securely.
6.
Secure to the extension pipe using the four supplied M5
screws.
The open end of the pipe should face the open end of
the ceiling-mount bracket as shown.
Direction to the
screen
Direction to the
screen
A
Direction to the
screen
89
Advertisement
Table of Contents
