Table of Contents
Advertisement
Network Menu
HDMI
DISPLAY
Network Mode
Standby Power
DHCP
IP
Subnet Mask
Gateway
DNS
MAC
Label
Network Mode
Standby Power (*1)
DHCP (*2)
IP
Subnet mask
Gateway
DNS
MAC
(*1) During standby, this must be set to On when controlling the projector via LAN or HDBaseT. Also, the
only control command that can be received during standby is Power On.
(*2) The function is only available when Network Mode is Projector Control.
PICTURE
LASER
ALIGNMENT
Network
Press ◄ or ► to select the network control. The options are Projector
Control and Service.
Press ◄ or ► to enable or disable the standby power function.
Press ◄ or ► to enable or disable DHCP setting.
Press ENTER to adjust the setting. Press ◄ or ► to select the number in
the address and press ▲ or ▼to increase or decrease the selected number.
HDMI
DISPLAY
PICTURE
Network Mode
Standby Power
DHCP
IP
Subnet Mask
Gateway
DNS
MAC
Use it to set the subnet mask. The input method is same as the IP address.
Use it to set the gateway. The input method is same as the IP address.
Use it to set the DNS. The input method is same as the IP address.
Displays the current MAC address.
67
CONTROL
SERVICE
Projector Control
Off
Off
192.168.0.100
255.255.255.0
0.0.0.0
0.0.0.0
00:18:23:2c:eb:8a
Description
LASER
ALIGNMENT
CONTROL
Network
Projector Control
Off
Off
192.168.0.100
255.255.255.0
0.0.0.0
0.0.0.0
00:18:23:2c:eb:8a
SERVICE
Advertisement
Table of Contents
