Geometry Menu - Canon LX-MU800Z User Manual

Geometry Menu

HDMI
DISPLAY
Label
Aspect Ratio
Overscan (*1) (*2)
Digital Alignment (*1)
(*1) This function is grayed-out and unusable when in 3D projection. Additionally, settings made in 2D
projection will be reset (turned to 0) when 3D projection is turned on.
(*2) If there's black band or noise surrounding the image of analog input, set Overscan to Crop.
PICTURE LASER
Geometry
Aspect Ratio
Overscan
Digital Alignment
Keystone
Rotation
Pincushion / Barrel
Top Left Corner
Top Right Corner
Bottom Left Corner
Bottom Right Corner
Reset
Blanking
Press ◄ or ► to adjust the aspect of the projected image.
5:4: The image is projected using an input signal aspect ratio of 5:4. Select
5:4 if an image of 5:4 aspect ratio cannot be correctly projected in Auto
mode.
4:3: The image is projected using an input signal aspect ratio of 4:3. Select
4:3 if an image of 4:3 aspect ratio cannot be correctly projected in Auto
mode.
16:10: The image is projected using an input signal aspect ratio of 16:10.
Select 16:10 if an image of 16:10 aspect ratio cannot be correctly
projected in Auto mode.
16:9: The image is projected using an input signal aspect ratio of 16:9.
Select 16:9 if an image of 16:9 aspect ratio cannot be correctly
projected in Auto mode.
1.88: The image is projected using an input signal aspect ratio of 1.88:1.
Select 1.88:1 if an image of 1.88:1 aspect ratio cannot be correctly
projected in Auto mode.
2.35: The image is projected using an input signal aspect ratio of 2.35:1.
Select 2.35:1 if an image of 2.35:1 aspect ratio cannot be correctly
projected in Auto mode.
Letterbox: The image of a letterbox signal is stretched equally in the
horizontal and vertical directions to fit the screen. Parts of the
displayed image are cropped at the top and bottom edges and
therefore not visible.
Auto: An image is projected at the aspect ratio of the input signal. Select
this mode for normal image projection.
True Size: The image is projected with the original resolution of the input
signal. Select this to clearly project a computer screen image that
has a resolution of WUXGA or lower.
Press ◄ or ► to hide edge of the projected image to damage the noise
appear. The options are Off, Crop and Zoom.
Press ENTER to enter the Digital Alignment menu. See
Menu" on page 61.
57
ALIGNMENT CONTROL SERVICE
Auto
Off
0
Description
"Digital Alignment