Front Panel Controls; Rear Panel Connections - Cambridge Audio CXR120 Owner's Manual

Front panel controls

1
1. Standby/On
2. Phones
For suitable headphones – connection
will mute the main zone speakers.
3. Tuning +/-
Used to tune FM/AM frequencies and
presets for the built-in Tuner.
4. Direct
Disables any audio processing on the
current source.

Rear panel connections

2 5 6
1
3
4
1. FM / AM aerials
2. Analogue inputs
(CXR120 3 inputs only)
3. 7.1 Direct in
4. Pre out / Sub out
5. Rec out
6. Zone 2 out
(CXR200 only)
7. HDMI 2.0 compatible
inputs
4
5
3
2
5. Zone
(CXR200 only)
Press this button followed by
Standby/On or Source +/- to change
Zone 2. When illuminated, indicates
that Zone 2 is On.
6. Display
Status window.
7. Source +/-
Also used for character entry. +/-
button to move between character
entry.
7
12
9
8
10 11
8. Vent grille
DO NOT OBSTRUCT!
9. Digital in
(CXR120 2 optical only)
10. Zone 2 speaker
outputs
(CXR200 only)
11. Bi-amp speaker
terminals
(CXR200 only)
12. Ethernet
7
6
8
9
8. Menu
9. Back
In the Setup menu, press to return to
the previous item.
10. USB / MP3 / HDMI/
MHL Inputs
USB - For playback of audio on USB
Media from USB Flash-disks or USB
hard-drives.
MP3 ( ) – For connection to a
portable audio device.
17 18
13
14
16 19
15
13. HDMI 2.0 outputs
CXR120 – Outputs mirrored.
CXR200 – Output 2 can display a
14. USB
antenna or optional BT100 Bluetooth
audio receiver.
15. Speaker terminals
16. IR receiver In
CXR120/200
CX R200
11
HDMI 8/ MHL
10
HDMI 8/MHL – For connection to a
HDMI source or MHL compatible
device.
11. Volume
for character entry. Rotate to browse
through the characters.
21
20
22
17. Emitter in
18. IR out
19. Trigger out
20. AC power socket
21. RS232C
Custom install control - a full protocol
is available for the CXR on our
website.
5