LG AVS2400 Owner's Manual page 23

• Active Microphone: Select the audio input to use for the active microphone.
- Auto: Select this option to set the active microphone automatically. If you select this option, basically the unit selects
the built-in microphone of the camera.
-
Microphone In: Set this option to use the connected external microphone.
- Camera 1: Set this option to use the built-in microphone of the camera.
• Active Microphone Volume: Select the volume level for the active microphone.
• Video Call Audio Output: Select the location for audio output during video calls.
-
HD Out: Set this option to use the built-in speakers for audio output during video calls.
- Line Out: Set this option to use the connected external headphone for audio output during video calls.
• Voice Call Audio Output: Select the location for audio output during voice calls.
- HD Out: Set this option to use the built-in speakers for audio output during voice calls.
-
Line Out: Set this option to use the connected external headphone for audio output during voice calls.
• System Ringer: Choose 'Enabled' to enable the system ringer for the system.
• System Ringer Volume: Select the volume level for the system ringer.
• System Ringer Tone: Select the tone for the system ringer.
• Primary Audio Output Test: Select the test to perform. During testing you should hear test tone. If you want to stop the
test, set it to off.
9. If you complete the initial configuration, press OK button to save the settings.
VCS main menu will be displayed.
NOTE
• Additionally, refer to the on-screen instructions for each option setting.
• If you want to skip some option settings, press
Downloaded from ManualMonitor.com Manuals
button.
Installation 23
3