Showroom Programme; Factory Default Settings; To Close The Settings ! Menu - Miele Standard Operating Instructions Manual

Settings menu

Showroom programme

The programme is for display use
only.
The dishwasher is fitted with various
demonstration programmes for
showroom use.
Demo mode
The
continuous loop
demonstrate the operation and
functions of the dishwasher:
Demo mode
– :
This programme is started by
pressing any button. It will run
through once and then has to be
started again.
Demo mode in continuous loop
–
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
Demo with sound
–
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
Demo programme
–
Using for the first time is disabled in
the display.
AutoOpen demo
–
The door will open automatically.
94
!
Demo mode in
and
programmes
:
:
:
To switch Demo mode on
^ Select the option you want and
confirm this with
^ Confirm the following questions with
OK
.
^ If necessary, touch any sensor to
start the Demo mode you have
selected.
^ To cancel the Demo mode, touch any
sensor again and confirm it with
To switch Demo mode off
^ Select
Off
^ Confirm the question
mode off?
:

Factory default settings

If you have altered any settings from
the factory default, you can reset them
back to the factory default settings.
^ Confirm the question
default settings?
^ Confirm
To close the Settings
Touch the Clear sensor U to come out
of the Settings
main menu.
OK
.
and confirm with
Switch demo
OK
with .
Reset factory
OK
with
All settings reset
menu and return to the
!
OK
.
OK
.
.
OK
with .
menu
!