Safety Precautions - Ednet X10 CD Manual

Safety precautions:

Warning:
 Read through these operating instructions before starting to use the device and
keep them safe for later consultation.
 To avoid injury, keep long and/or lightweight objects, such as clothing (scarves,
ties, etc.), jewellery (necklaces, bracelets, etc.) as well as long hair away from the
opening where paper is inserted.
 If the device is not going to be used for an extended period, switch it off entirely
and unplug the power socket.
 Do not insert hands or fingers into the input slot since this may cause serious
injuries.
 Avoid all contact with liquids and do not spray any flammable liquids, compressed
air or gases into or onto the device as these could easily ignite.
 Unplug or switch off the device before moving, cleaning or emptying it.
 Immediately switch off the device in the event of damage or improper functioning
and unplug the power socket. Get the device checked by a specialist dealer or
customer service.
 The device must not be operated using a damaged power cable.
 Empty the collecting container regularly.
 Do not leave the shredder unattended, especially if there are children or animals
nearby. The device is not a toy - ensure it is out of the reach of children and
animals.
 The device is only suitable for use indoors.
 Keep the device as close as possible to the source of power in case of
emergencies. If possible, do not use an extension cable.
 This device was designed to shred paper up to DIN A4 size (80g/m²). Larger sheets
of paper must be folded or cut until they are A4-sized or smaller.
 To avoid overloading, ensure that you do not exceed the maximum number of
sheets per operation.
 Do not insert any plastic covers or metal strips into the cutting unit since such
materials may damage the blades.
 Remove all paper clips and staples before inserting the paper.
- 2 -