Hydracoach Reset - Sportline hydracoach User Manual

Table of Contents

Advertisement

START
HydraCoach
Press the Mode Button to cycle through the NORMAL OPERATING
MODE function screens.
HOLD THE
START/STOP/RESET
START/STOP/RESET
BUTTON
FOR 2 SECONDS
FOR 2 SECONDS
16
STOP
Reset
HOLD THE
BUTTON
RESET
The HydraCoach may be reset at any time. To do this, the
HydraCoach must fi rst be stopped as described in the previous
section. From either the TAC/TET/AVG or PHG/%DG/AVG
screen, press and hold the Start/Stop/Reset button for
2 seconds. All Hydration Program functions will reset to zero or
their last set default values. The computer is now ready to start
a new Hydration Program.
24-HOUR LIMIT RESET
The HydraCoach monitors the amount of fl uid that an individual
consumes over the course of a 24-hour day. When the Total
Elapsed Time (TET) function reaches 24 hours, the HydraCoach
will stop automatically. All NOM function screens will begin
fl ashing to notify you that the 24-hour time limit has been
reached. At this point, you may either toggle through the NOM
function screens to review your end-of-day data by means of
the Mode button, or you may reset the computer and begin a
new Hydration Program.
To reset the Hydration Program after the 24-hour time limit has
been reached, simply press and hold the Start/Stop/Reset
button for 2 seconds in any of the fl ashing NOM function
screens. Note: This is the only case in which the Hydration
Program may be reset from the Clock and Date screen (CLK/
DAY). All Hydration Program functions will reset to zero or their
last set default values. The computer is now ready to start a
new Hydration Program.
17

Advertisement

Table of Contents
loading

Table of Contents