Hydracoach Initial Setup Mode - Sportline hydracoach User Manual

HydraCoach
Initial Setup Mode
Initial Setup Mode may be accessed in two ways: 1) Installing
a new battery 2) When both the Setup and Start/Stop/Reset
buttons are pressed and held simultaneously for 2 seconds (the
program will display user preset settings).
The Initial Setup Mode allows you to select operational units
and enter personal data in order to customize the HydraCoach
Hydration Program to meet your needs.
SETUP MODE BUTTON OPERATIONS
Mode Button – Toggles through units and advances digits.
Hold down for fast advance.
Setup Button – Sets units or digits and advances to the next
item or screen.
Start/Stop/Reset Button – Has no function in Setup Mode.
INITIAL SETUP MODE PROGRAM
Units of Fluid Measure
Select OZ (Ounces) or L (Liters)
as the program's default unit of
fl uid measure. Note: The default
setting for Units of Fluid Measure is
Ounces (OZ).
10
Units of Weight
Select LB (Pounds) or KG (Kilograms) as the
program's default unit of weight. Note: The
default setting for Units of Weight is Pounds (LB).
Current Weight
Enter your current weight into the computer one digit at a time.
Personal Hydration Goal (PHG)
Based on your previously programmed weight, the computer
will automatically calculate your recommended daily Personal
Hydration Goal (PHG) value and display it on the screen. This
value may be accepted or adjusted up or down to meet your
personal daily fl uid requirements.
Clock Format
Select 12 or 24 Hour clock
format. Note: The default setting
for Clock Format is 12 Hour.
Current Time
Enter the current time into the computer in hours and minutes.
Note: There is only a PM time designation in 12 Hour format;
there is no AM time designation.
Date Format
Select date format 1. MM/DD/YY or 2. DD/MM/YY and enter
the current month, day and year into the computer.
MONTH MONTH
1.
DA Y DA Y
2.
DA Y DA Y YEAR
MONTH MONTH YEAR
11