Hydracoach Screen Display Sequence - Sportline hydracoach User Manual

HydraCoach
Screen Display Sequence
When you have completed the Initial Setup Mode, the
computer will automatically enter into the Normal Operating
Mode (NOM). There are three NOM function screens. The
fi rst two are specifi c to the Hydration Program, while the third
displays the time and date.
Normal Operating Mode (NOM) Function Screens
HYDRATION PROGRAM
HYDRATION PROGRAM
SCREEN 1
TOTAL AMOUNT PERSONAL HYDRATION
CONSUMED (TAC)
TOTAL ELAPSED TIME
(TET)
AVERAGE CONSUMPTION AVERAGE CONSUMPTION
(AVG)
Press the Mode button to cycle through the
NORMAL OPERATING MODE (NOM) function screens.
14
SCREEN 2 CLOCK AND DATE SCREEN
(PHG)
CLOCK (CLK)
PERCENT OF DAILY
GOAL (%DG) DATE (DAY)
(AVG)
HydraCoach
• To drink, gently bite down on mouthpiece and sip
• To ensure accuracy take deliberate, pronounced sips.
Low intensity sips may not register with hydration monitor.
Starting and Stopping the Hydration Program
All Hydration Program operations are executed by means of
the Start/Stop/Reset button and may only be performed from
within either of the two Hydration Program screens (TAC/TET/
AVG or PHG/%DG/AVG). Note: The Hydration Program may
never be started or stopped, or a NOM reset performed, from
the Clock and Date screen (CLK/DAY).
To start the HydraCoach, make sure that you are in either
the TAC/TET/AVG or PHG/%DG/AVG screen, and press
the Start/Stop/Reset button. A Stopwatch icon
running in the lower right hand corner of the display. This
indicates that the Hydration Program is active, and that you
may begin drinking at any time.
To stop the HydraCoach, make sure that you are in either the
TAC/TET/AVG or PHG/%DG/AVG screen, and press the
Start/Stop/Reset button. The Stopwatch icon will pause,
and all Hydration Program functions will cease updating. The
HydraCoach will display the information that was last recorded
before the computer was stopped. To resume the Hydration
Program, press the Start/Stop/Reset button again in either the
TAC/TET/AVG or PHG/%DG/AVG screen, and all functions
will pick up where they last left off.
Operation
will begin
15