Tail Elimination (Tail): Menu 42; Talk Around (Talk): Menu 43; Time Out Timer(Tot): Menu 44 - JETStream jt270m User Manual

Tail Elimination (Tail): Menu 42

The Tail elimination function eliminates the burst of
background noise encountered at the end of a
transmission. . Set Menu 42 to ON if you would like
to enable this feature, or OFF to disable it. The default
is ON.

Talk Around (Talk): Menu 43

When the Talk around feature is enabled, the transmit
and receive frequency and signaling mode are the
same. This would be useful if two stations who are
close together wish to temporarily use the output
frequency of a repeater. Turn Menu 43 ON to enable
this feature. The default is OFF.

Time out timer(TOT): Menu 44

You may use Menu 44 to specify a time-out timer for
the transmitter. Setting such a timer would prevent
accidental, lengthy transmissions where the
transmitter does not properly unkey(a stuck PTT key,
for instance). Not only could such transmissions be
disruptive to other communications, they could
damage the transmitter. Select Menu 44, and set the
Time-Out Timer to OFF, or in 10-second intervals of
up to 120 seconds. The default setting is 30 seconds.
40