Fm Scan(Fm Scan）): Menu 13; Fm Sql (Fm Sql): Menu 14 - JETStream jt270m User Manual

Open/Close FM Function
You can set the P1, P2, or P3 key as the shortcut
key to turn the FM radio on or off.
With the FM radio turned on, use "CHA+/CHA-"
keys to select a station, or enter the station's
frequency directly from the numeric keypad on
the microphone. You can also store your favorite
radio stations using the programming software.
Note: To ensure good FM reception, please connect an antenna
to the transceiver.
FM Scan(FM Scan）): Menu 13
The FM Scan function determines whether the
"CHA+/CHA-" keys scan for active FM channels or
simply tune the radio in 50 KHz tuning steps. Setting
FM Scan (Menu 14) to ON will increase tuning speed,
as only active FM radio signals will stop tuning.

FM SQL (FM SQL): Menu 14

The FM SQL menu determines the sensitivity of the
FM broadcast scan. The higher this setting, the
stronger a signal must be in order for the scan to stop
on a particular FM broadcast channel. Settings range
from 0 (always on) to 9 (tightest squelch for scan).
The default level is 5.
27