Samsung ln40c550 User Manual page 24

Advanced Features
Network Setup (Auto) Network Setup (Manual)
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Wired Network Setup
screen appears.
Use the Automatic Wired Network Setup when connecting
your lV to a network that supports DHCP. To set up your
lV's cable network connection automatically, follow these
steps:
How to set up automatically
1. Connect your lV to your LAN as described in the
previous section.
2. Turn on your lV, press the MENU button on your
remote, use the AorT button to select Setup, and then
press the ENTER
(31
button.
3. Use the A orT button to select Network in the Setup
menu, and then press the ENTER
(31
button. The
Network screen appears.
~
Move
G
Enter
~
Return
I
Network Type
Network Setup
Network test
Network
: Wired
~I
Use the Manual Wired Network Setup when connecting
your lV to a network that requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The
Network connection values are displayed.
How to set up manually
To set up your lV's cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the "How to set up
automatically" procedure.
2. Set Internet Protocol Setup to Manual Setup.
3. Press the T button on your remote to go to the first
entry field.
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
5. When done, press the RETURN button on your remote.
6. Select Network Test to check the Internet connectivity.
Wired Network Setu
I
Internet Protocol Setup
IP d
r
Gateway
DNS Server
o
rver
: Auto Setup
~
I
• ••
•••••
••
••
. Auto Setup
••
~
Move
G
Enter
~
Return
7. Set Internet Protocol Setup to Auto Setup.
8. Auto Setup acquires and enters the needed Internet
values automatically.
9. Select Network Test to check the Internet connectivity.
10. If the Network Function has not acquired the network
connection values, go to the directions for Manual
Setup below.
24
English