Troubleshooting; Ce Declaration Of Conformity - Chicco CuociPappa Natural Instructions For Use Manual

X. TROUBLESHOOTING
PROBLEM
The display does not · Power cord not properly inserted in the ap-
come on pliance
The symbol appears on the · The water tank is missing or has not been
display and there is a beep filled or positioned correctly
every 10 seconds · The water does not flow freely from the tank
to the boiler
· Lime scale accumulation in the boiler
The symbol appears on the · The boiler has overheated due to the accu-
display mulation of lime scale
· The boiler has overheated due to repeated
. cooking cycles
The appliance will not · The jug or the lid are not in the right position · Position the jug and lid correctly so that the safety
blend or the cooking cycle
will not start
A bad smell or excessive · New product
noise comes from the mo- · Too much food
tor unit during blending · Food that is too hard in the jug
· Blending times too long
Food leaks from the jug · Too much food in the jug or the food is too
during blending liquid
The appliances takes too · Limescale accumulation in the boiler
long to produce steam or
does not produce any
The food is not cooked · Pieces of food too large
properly · Too much food in the basket
· Cooking times not adequate
Steam coming out of the · The boiler cap is not inserted or is not prop-
boiler cap area erly closed
· The steam outlet is obstructed by food resi-
due or limescale
The "add water" signal is · The water tank is missing or has not been
activated at the start of or filled or positioned correctly
during the cooking cycle · The water does not flow freely from the tank
to the boiler
The cap will not come off · Overheating
the jar after cooking
After cooking, there is wa- · Blade unit missing or positioned incorrectly
ter under the water tank or · Blade seal missing or positioned incorrectly
under the appliance
Water leaking from the · Cap not closed properly
tank · Seals missing or positioned incorrectly
XI. TECHNICAL DATA
Model: MEC-6131V
Supply voltage: 220-240 V~, 50/60 Hz
Boiler power: 400 W
Motor power: 140 W
Blender operating cycles: 10 sec. ON – 10 sec. OFF
Made in China
This product complies with the Directive 2012/19/EU.
The crossed bin symbol on the appliance indicates that the
product, at the end of its life, must be disposed of separately from
domestic waste, either by taking it to a separate waste disposal
site for electric and electronic appliances or by returning it to
your dealer when you buy another similar appliance. The user is
responsible for taking the appliance to a special waste disposal
site at the end of its life. If the disused appliance is collected
correctly as separate waste, it can be recycled, treated and dis-
POSSIBLE CAUSES
posed ecologically; this avoids a negative impact on either the
environment and health, and contributes towards the recycling
of the product's materials. For further information regarding
the waste disposal services available, contact your local waste
disposal agency or the shop where appliance has been bought.
Warranty
This appliance is guaranteed against manufacturing defects for
two years from the date of purchase (the date shown on the re-
ceipt or other proof of date of purchase) or for any other period
envisaged by the applicable law in the country of purchase. The
warranty does not cover parts subject to normal wear.

CE DECLARATION OF CONFORMITY

Artsana S.p.A hereby declares that this Chicco appliance, MOD.
MEC-6131V,complieswithalltheessentialrequirementsandother
provisions indicated in the EU Directives 2004/108/EC (electro-
magnetic compatibility) and 2006/95/EC (electrical safety) and
2011/65/EU (RoHS). Afull copyofthe ECdeclaration can be re-
questedfromArtsanaS.p.A.ViaS.Catelli1,22070Grandate(Co)
Italy.
36
POSSIBLE SOLUTIONS
· Check that the power cord is inserted correctly into the
connector and that the appliance is plugged in
· Switch off the appliance and unplug it. Fill the tank with
water before restarting the cycle.
· Switch off the appliance and unplug it. Leave it to cool
completely (at least 30 minutes) then clean.
· As above
· Switch off the appliance and unplug it. Leave it to cool
completely (at least 30 minutes) then clean.
· Leave the appliance to cool between one cycle and the
next
switches are activated
· During the first uses, this is normal
· Reduce the amount of food in the jug
· Do not blend food that is too hard. Defrost food before
blending it.
· Follow the recommended blending times, leaving the
appliance to cool to prevent overheating.
· Reduce the amount of food or liquid in the jug
· Perform cleaning and maintenance on the boiler
· Cut food into smaller pieces
· Reduce the amount of food
· Set longer cooking times
· Position the boiler cap and close it well
· Perform cleaning and maintenance on the boiler. If neces-
sary, clear the steam outlet without damaging the seal
· Position the tank correctly after filling it with a suitable
volume of water
· Perform cleaning and maintenance on the boiler
· Wait a few minutes and allow to cool
· Insert the blade unit in the jug and turn it until it is se-
curely fitted
· Check the presence and position of the seal
· Tighten the cap
· Check the presence and position of both seals
 Afull copyofthe ECdeclaration can be re- Afull copyofthe ECdeclaration can be re-