Technical Data - DeWalt DW771 Manual

DW771, DW777 CrOss-CUT miTre saW
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
reliable partners for professional power tool users.

Technical data

Voltage V
(U.K. & Ireland only) V
Power input W
Blade diameter mm
Blade bore mm
Max. blade speed min
Mitre (max. positions) left and right
Bevel (max. positions) left
Compound mitre bevel
mitre
Capacities
cross-cut 90° mm
mitre 45° mm
mitre 48° mm
bevel 45° mm
bevel 48° mm
Overall dimensions cm
Weight kg
L (sound pressure) dB(A)
pA
K (sound pressure
pA
uncertainty) dB(A)
L (acoustic power) dB(A)
WA
K (acoustic power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to EN61029:
Vibration emission value a
h
a
= m/s²
h
Uncertainty K = m/s²
Notified body, delivering the certificate
TÜV Rheinland Product and Safety
GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln, Germany
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
WALT one of the most
e
DW771
230
230/115
1550/1400 1800/1600
216
30
2600-5200
-1
50°
48°
45°
45°
60 x 270
60 x 190
60 x 180
48 x 270
45 x 270
460 x 560 x 430 460 x 560 x 430
14.0
90.8
3
102
3.2
1.6
1.5
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
DW777
230
230/115
Definitions: safety Guidelines
The definitions below describe the level of severity for each signal word.
216
Please read the manual and pay attention to these symbols.
30
6300
50°
48°
45°
45°
60 x 270
60 x 190
60 x 180
48 x 270
45 x 270
14.0
93
3
eC-Declaration of conformity
104
3.9
DW771, DW777
D WALT declares that these products described under "technical data"
e
have been designed in compliance with:
1.7
98/37/EC (until Dec. 28, 2009); 2006/42/EC (from Dec. 29, 2009);
1.5
2004/108/EC; 2006/95/EC; EN 61029-1:2000 + A11:2003 +
A12:2003; EN 61029-2-9:2002; EN 55014-1; EN55014-2;
EN 61000-3-2; EN 61000-3-3.
For more information, please contact D
or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file
and makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
11/2007
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
CAUTION: Used without the safety alert symbol indicates
a potentially hazardous situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
WALT at the address below,
e
e
eNgli Sh
WALT.
21