Local Set-Up; Using The Install Wizard - Bosch NIN-73013 Installation Manual

FLEXIDOME IP starlight
7000 VR
5.6

Local set-up

The Menu button on the control panel is used to access the
camera install wizard. When there is a choice in the wizard, the
options are selected by either a short press (less than 2 s) or a
long press (more than 2 s) of the Menu button.
Use the install wizard for the following functions:
–
–
–
–
Note:
The zoom and focus are adjusted again later (with the dome
bubble in place) via the web browser. This optimizes picture
sharpness in both bright and low-level lighting.
5.6.1

Using the install wizard

To perform the set-up:
1.
2.
3.
Bosch Security Systems
Choose application variant
Change image orientation
Activate automatic back focus
Choose analog output
Power-up the camera and wait briefly until all LEDs show
green.
Open the camera install wizard by pressing the Menu
button.
To change the variant, briefly press Menu a number of
times until the desired variant is shown (remember that
changing the variant will reboot the system and may
eventually need a reset to return to factory defaults).
Installation | en
2016.06 | v1.0 | AM18-Q0710
23