Texture Panel; Motion Control - Sharp GC40K Manual

Motion Control

1
Built-in sensor detects handset movement for the following functions.
MC Cursor Tilt handset to move cursor and proceed
MC Shortcut Shake handset to activate functions in User Shortcut
Shake Counter Count the number of times handset is shaken
Shake Sound Shake handset to produce sound effects
Compass Find magnetic north to calculate direction
Viewer Display In Viewer Position, change screen orientation automatically See P.7-15
In this manual, the above functions are collectively referred to as "Motion Control."
C Adjust MC Sensor (see P.15-22) before using Motion Control for the first time.
C When shaking or moving handset:
^ Do not shake handset roughly. Handset may slip, resulting in injury or damage.
^ Do not drop or subject handset to shocks.
C Motion Control may not work correctly when:
^ Aboard trains or in vehicles
^ In steel-framed buildings
^ Near magnetized objects
C Motion Control may not work correctly after handset is placed near magnetized
objects (see below for examples). In this case, adjust MC Sensor (see P.15-22).
^ Magnets (for whiteboards, furniture, bags, etc.)
^ Audio speakers, magnetic necklaces, etc.
1-14
See P.1-33
See P.15-28
See P.15-24
See P.15-25
See P.15-23
Precautions
^ Near metal objects such as desks and shelves
^ Near or inside elevators

Texture Panel

Change handset's tactile sensation by replacing the panel (Sub Display side).
^ Two Texture Panels are included in the package.
^ Additional Texture Panels may be purchased separately. Choose from various panels
with different sensation and texture such as metal, leather, stone, etc.
Replacing Texture Panel
Be careful not to remove battery when replacing Texture Panel with handset
power on.
1
Slide Portrait/Macro Selector
to Portrait
2
Pull out Battery Cover Latch
as shown in e , then slide
cover as indicated in f
e
f
3
Lift and remove cover as
shown
4
Slide out Texture Panel
1-15
1