Sharp GC40K Manual page 132

Digital Input
Use Optical Digital Audio Toslink-Mini or Mini-Mini Cables (sold separately) with
Optical Conversion Cable to connect audio sources to handset.
^ Use Optical Conversion Cable only for recording music.
^ Optical Conversion Cable is designed exclusively for V604SH and other specified
Vodafone handsets; to prevent damage or malfunction, do not use it with other devices.
To
OPTICAL OUT
Mini Plug Jack
Optical Digital
Connecting Cable
Optical Digital
Connecting Cable
Optical Conversion
Cable (Plug)
To Rectangular
DIGITAL OUT
(Toslink) Plug Jack
10
Analog Input
Use Stereo Mini-Phono (Y-Adapter) or Stereo Mini-Stereo Mini Cable, etc. (sold
separately) and Analog Conversion Cable to connect audio sources to handset.
^ Before connecting handset to audio sources, activate Off-Line Mode (see Steps 1 - 3 on
P.10-9).
^ Use a device-to-device connecting cable. Do not use speaker or headphone cables.
To Line Out
LINE OUT
Connecting Cable
Connecting
Cable
Analog Conversion
Right (red)
R
L
Left (white) To Line Out
10-8
Optical Mini Plug
(3.5 mm)
AC 100V
Optical Digital
Line In Connector
Stereo Mini Plug
(3.5 mm)
AC 100V
Cable (Plug)
Optical Digital
Line In Connector
Recording
^ Most operations are described with Synchro Recording active (see P.10-10).
^ Read the precautions on P.10-5 before recording.
To listen to music while recording, adjust Monitor Level before recording (see P.10-10).
^ Prepare an audio source and pause playback at the beginning of music.
H
Index Menu Music
Select 2 MP3 Music Player and press b
1
Select 2 Record and press b
2
Receive Calls? appears.
^ To prevent disruption by calls, choose 2No in Step 3 to activate Off-Line Mode (see
P.10-5).
^ If Off-Line Mode (see P.3-6) is already active, skip ahead to Step 4.
Choose 2 No and press b
3
Recording window opens.
^ Customize settings before recording (see P.10-10 "Recording
Settings").
C
To accept incoming calls, mail, etc. while recording, choose
1Yes A Press b
4
Connect handset to the audio source, and play
music to check the recording level
+ ^ Recording level adjusts automatically for digital
source.
^ Use E to adjust recording level for analog source
(not available while recording).
B Do not let recording level reach the red zone.
^ After 20 minutes of inactivity handset returns to
Standby.
Press b
5
Handset is ready for Synchro Recording.
When Synchro Recording is Off, press b again
C
J s c
Q
10
Back REC Menu
Recording
Red Bar
Level Meter
A
Start playback
10-9