C Sub Display Indicators; Display Positions & Key Ops; C Rotating Display - Sharp GC40K Manual

Sub Display Indicators
1
Sub Display & Display indicators represent the same functions (see P.1-8 - 1-9).
w U n P
1
1 w Battery Strength
w always appears in Standby. i , u ,
x , d , e or j appears with messages
for Alarm, incoming calls, information,
etc.
k Pen Light
w and k flash when Pen Light is in
use.
2 U Signal Strength
When handset is closed (clamshell closed), press h for 1+ seconds or press r to
+
illuminate Sub Display Backlight. Backlight stays off if Sub Display Backlight Settings
(see P.7-13) is set to Off.
1-10
2 3 4
3 n Information
Appears when there is an item in
Information Menu.
^ When n appears, press h for 1+
seconds to see specific indicators.
uideux
Z Off-Line Mode
n Auto Reply Set
4 Time/Music Player or Voice Recorder
Status
Current time and corresponding
indicator flash when Stopwatch,
Kitchen Timer, Music Player or Voice
Recorder is running.
Display Positions & Key Ops
V501SH features a rotating Display. Select from four positions. In this manual, most
operations are described with handset open (clamshell open). However, mobile
camera operations (see P.6-2) are mainly described with Display in Viewer position.
Rotating Display
Hold handset with both hands when changing Display position.
Clamshell Closed
1
Handset is closed with Display facing inward.
^ Keep handset in this position when not in use.
+
2
Clamshell Open
3
Open handset
Handset is open with Display facing inward.
^ Place or answer calls, or enter text.
Place or answer calls with handset open
(clamshell open) or in Viewer position.
1-11
1