Dell Embedded Box PC 3000 Installation And Operation Manual page 18

Overview
The Embedded Box PC is shipped with Windows 7 Professional SP1. For more information, see
us.
Boot up and log in
Before configuring the Windows 7 Professional SP1, connect a keyboard, mouse, and monitor to the Embedded Box PC. Turn on
the Embedded Box PC to boot into Windows.
1. Select regional settings.
2. Create a user account.
3. Read and agree to applicable End User Licence Agreements.
4. Select your preferred settings.
NOTE: Connect to a wireless network if available.
Restoring Windows 7 Professional SP1
You can restore Windows 7 Professional SP1 on the Embedded Box PC by using the recovery OS image on the boot partition, which
resets the run-time image back to the factory image.
Connect a keyboard, mouse, and monitor to the Embedded Box PC. Boot to the recovery environment by following these steps:
1. Turn off your computer.
2. Turn on the Embedded Box PC.
3. When the Dell logo appears on the screen, press F8 several times to open the Advanced Boot Options menu.
4. Use the arrow keys to select Repair Your Computer and press Enter.
5. From the System Recovery Options menu, select a keyboard layout, and then click Next.
6. On the next screen, log in as a local user or the Administrator.
7. From the Recovery options menu, select Factory Image Restore.
8. Click Next to open the Confirm Data Deletion menu.
9. Select the Yes, reformat hard drive and restore system software to factory condition check box and click Next.
10. After the restore operation is complete, click Finish to restart the computer.
Windows 7 Professional SP1 basic functions
BIOS update
BIOS updates for the Embedded Box PC may be downloaded from dell.com/support. The download includes an executable that
may be ran from the local machine.
Watchdog Timer
The Watchdog Timer for Windows 7 Professional SP1 is controlled via a BIOS setting. Enter the BIOS during boot by pressing F2.
The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer.
TPM support
Windows 7 Professional SP1 supports TPM 1.2. For more information about TPM resources, see
us/library/cc749022(v=ws.10).aspx.
System shutdown
Click Start, and then click Shut down to shut down the Embedded Box PC.
System restart
Click Start, and click the arrow next to Shut down, and then click Restart to restart the Embedded Box PC.
18
https://support.microsoft.com/en-
https://technet.microsoft.com/en-